
``subprocess`` --- Subprocess management
****************************************

The ``subprocess`` module allows you to spawn new processes, connect
to their input/output/error pipes, and obtain their return codes.
This module intends to replace several other, older modules and
functions, such as:

   os.system
   os.spawn*

Information about how the ``subprocess`` module can be used to replace
these modules and functions can be found in the following sections.

See also:

   **PEP 324** -- PEP proposing the subprocess module


Using the subprocess Module
===========================

The recommended approach to invoking subprocesses is to use the
following convenience functions for all use cases they can handle. For
more advanced use cases, the underlying ``Popen`` interface can be
used directly.

subprocess.call(args, *, stdin=None, stdout=None, stderr=None, shell=False, timeout=None)

   Run the command described by *args*.  Wait for command to complete,
   then return the ``returncode`` attribute.

   The arguments shown above are merely the most common ones,
   described below in *Frequently Used Arguments* (hence the use of
   keyword-only notation in the abbreviated signature). The full
   function signature is largely the same as that of the ``Popen``
   constructor - this function passes all supplied arguments other
   than *timeout* directly through to that interface.

   The *timeout* argument is passed to ``Popen.wait()``. If the
   timeout expires, the child process will be killed and then waited
   for again.  The ``TimeoutExpired`` exception will be re-raised
   after the child process has terminated.

   Examples:

      >>> subprocess.call(["ls", "-l"])
      0

      >>> subprocess.call("exit 1", shell=True)
      1

   Warning: Invoking the system shell with ``shell=True`` can be a security
     hazard if combined with untrusted input. See the warning under
     *Frequently Used Arguments* for details.

   Note: Do not use ``stdout=PIPE`` or ``stderr=PIPE`` with this function.
     As the pipes are not being read in the current process, the child
     process may block if it generates enough output to a pipe to fill
     up the OS pipe buffer.

   Changed in version 3.3: *timeout* was added.

subprocess.check_call(args, *, stdin=None, stdout=None, stderr=None, shell=False, timeout=None)

   Run command with arguments.  Wait for command to complete. If the
   return code was zero then return, otherwise raise
   ``CalledProcessError``. The ``CalledProcessError`` object will have
   the return code in the ``returncode`` attribute.

   The arguments shown above are merely the most common ones,
   described below in *Frequently Used Arguments* (hence the use of
   keyword-only notation in the abbreviated signature). The full
   function signature is largely the same as that of the ``Popen``
   constructor - this function passes all supplied arguments other
   than *timeout* directly through to that interface.

   The *timeout* argument is passed to ``Popen.wait()``. If the
   timeout expires, the child process will be killed and then waited
   for again.  The ``TimeoutExpired`` exception will be re-raised
   after the child process has terminated.

   Examples:

      >>> subprocess.check_call(["ls", "-l"])
      0

      >>> subprocess.check_call("exit 1", shell=True)
      Traceback (most recent call last):
         ...
      subprocess.CalledProcessError: Command 'exit 1' returned non-zero exit status 1

   Warning: Invoking the system shell with ``shell=True`` can be a security
     hazard if combined with untrusted input. See the warning under
     *Frequently Used Arguments* for details.

   Note: Do not use ``stdout=PIPE`` or ``stderr=PIPE`` with this function.
     As the pipes are not being read in the current process, the child
     process may block if it generates enough output to a pipe to fill
     up the OS pipe buffer.

   Changed in version 3.3: *timeout* was added.

subprocess.check_output(args, *, stdin=None, stderr=None, shell=False, universal_newlines=False, timeout=None)

   Run command with arguments and return its output as a byte string.

   If the return code was non-zero it raises a ``CalledProcessError``.
   The ``CalledProcessError`` object will have the return code in the
   ``returncode`` attribute and any output in the ``output``
   attribute.

   The arguments shown above are merely the most common ones,
   described below in *Frequently Used Arguments* (hence the use of
   keyword-only notation in the abbreviated signature). The full
   function signature is largely the same as that of the ``Popen``
   constructor - this functions passes all supplied arguments other
   than *timeout* directly through to that interface. In addition,
   *stdout* is not permitted as an argument, as it is used internally
   to collect the output from the subprocess.

   The *timeout* argument is passed to ``Popen.wait()``. If the
   timeout expires, the child process will be killed and then waited
   for again.  The ``TimeoutExpired`` exception will be re-raised
   after the child process has terminated.

   Examples:

      >>> subprocess.check_output(["echo", "Hello World!"])
      b'Hello World!\n'

      >>> subprocess.check_output(["echo", "Hello World!"], universal_newlines=True)
      'Hello World!\n'

      >>> subprocess.check_output("exit 1", shell=True)
      Traceback (most recent call last):
         ...
      subprocess.CalledProcessError: Command 'exit 1' returned non-zero exit status 1

   By default, this function will return the data as encoded bytes.
   The actual encoding of the output data may depend on the command
   being invoked, so the decoding to text will often need to be
   handled at the application level.

   This behaviour may be overridden by setting *universal_newlines* to
   ``True`` as described below in *Frequently Used Arguments*.

   To also capture standard error in the result, use
   ``stderr=subprocess.STDOUT``:

      >>> subprocess.check_output(
      ...     "ls non_existent_file; exit 0",
      ...     stderr=subprocess.STDOUT,
      ...     shell=True)
      'ls: non_existent_file: No such file or directory\n'

   New in version 3.1.

   Warning: Invoking the system shell with ``shell=True`` can be a security
     hazard if combined with untrusted input. See the warning under
     *Frequently Used Arguments* for details.

   Note: Do not use ``stderr=PIPE`` with this function. As the pipe is not
     being read in the current process, the child process may block if
     it generates enough output to the pipe to fill up the OS pipe
     buffer.

   Changed in version 3.3: *timeout* was added.

subprocess.DEVNULL

   Special value that can be used as the *stdin*, *stdout* or *stderr*
   argument to ``Popen`` and indicates that the special file
   ``os.devnull`` will be used.

   New in version 3.3.

subprocess.PIPE

   Special value that can be used as the *stdin*, *stdout* or *stderr*
   argument to ``Popen`` and indicates that a pipe to the standard
   stream should be opened.

subprocess.STDOUT

   Special value that can be used as the *stderr* argument to
   ``Popen`` and indicates that standard error should go into the same
   handle as standard output.

exception exception subprocess.SubprocessError

   Base class for all other exceptions from this module.

   New in version 3.3.

exception exception subprocess.TimeoutExpired

   Subclass of ``SubprocessError``, raised when a timeout expires
   while waiting for a child process.

   cmd

      Command that was used to spawn the child process.

   timeout

      Timeout in seconds.

   output

      Output of the child process if this exception is raised by
      ``check_output()``.  Otherwise, ``None``.

   New in version 3.3.

exception exception subprocess.CalledProcessError

   Subclass of ``SubprocessError``, raised when a process run by
   ``check_call()`` or ``check_output()`` returns a non-zero exit
   status.

   returncode

      Exit status of the child process.

   cmd

      Command that was used to spawn the child process.

   output

      Output of the child process if this exception is raised by
      ``check_output()``.  Otherwise, ``None``.


Frequently Used Arguments
-------------------------

To support a wide variety of use cases, the ``Popen`` constructor (and
the convenience functions) accept a large number of optional
arguments. For most typical use cases, many of these arguments can be
safely left at their default values. The arguments that are most
commonly needed are:

   *args* is required for all calls and should be a string, or a
   sequence of program arguments. Providing a sequence of arguments is
   generally preferred, as it allows the module to take care of any
   required escaping and quoting of arguments (e.g. to permit spaces
   in file names). If passing a single string, either *shell* must be
   ``True`` (see below) or else the string must simply name the
   program to be executed without specifying any arguments.

   *stdin*, *stdout* and *stderr* specify the executed program's
   standard input, standard output and standard error file handles,
   respectively.  Valid values are ``PIPE``, ``DEVNULL``, an existing
   file descriptor (a positive integer), an existing file object, and
   ``None``.  ``PIPE`` indicates that a new pipe to the child should
   be created.  ``DEVNULL`` indicates that the special file
   ``os.devnull`` will be used.  With the default settings of
   ``None``, no redirection will occur; the child's file handles will
   be inherited from the parent.  Additionally, *stderr* can be
   ``STDOUT``, which indicates that the stderr data from the child
   process should be captured into the same file handle as for
   *stdout*.

   If *universal_newlines* is ``True``, the file objects *stdin*,
   *stdout* and *stderr* will be opened as text streams in *universal
   newlines* mode using the encoding returned by
   ``locale.getpreferredencoding(False)``.  For *stdin*, line ending
   characters ``'\n'`` in the input will be converted to the default
   line separator ``os.linesep``.  For *stdout* and *stderr*, all line
   endings in the output will be converted to ``'\n'``.  For more
   information see the documentation of the ``io.TextIOWrapper`` class
   when the *newline* argument to its constructor is ``None``.

   Note: The *universal_newlines* feature is supported only if Python is
     built with universal newline support (the default).  Also, the
     newlines attribute of the file objects ``Popen.stdin``,
     ``Popen.stdout`` and ``Popen.stderr`` are not updated by the
     ``Popen.communicate()`` method.

   If *shell* is ``True``, the specified command will be executed
   through the shell. This can be useful if you are using Python
   primarily for the enhanced control flow it offers over most system
   shells and still want access to other shell features such as
   filename wildcards, shell pipes and environment variable expansion.

   Changed in version 3.3: When *universal_newlines* is ``True``, the
   class uses the encoding ``locale.getpreferredencoding(False)``
   instead of ``locale.getpreferredencoding()``.  See the
   ``io.TextIOWrapper`` class for more information on this change.

   Warning: Executing shell commands that incorporate unsanitized input from
     an untrusted source makes a program vulnerable to shell
     injection, a serious security flaw which can result in arbitrary
     command execution. For this reason, the use of *shell=True* is
     **strongly discouraged** in cases where the command string is
     constructed from external input:

        >>> from subprocess import call
        >>> filename = input("What file would you like to display?\n")
        What file would you like to display?
        non_existent; rm -rf / #
        >>> call("cat " + filename, shell=True) # Uh-oh. This will end badly...

     ``shell=False`` disables all shell based features, but does not
     suffer from this vulnerability; see the Note in the ``Popen``
     constructor documentation for helpful hints in getting
     ``shell=False`` to work.

These options, along with all of the other options, are described in
more detail in the ``Popen`` constructor documentation.


Popen Constructor
-----------------

The underlying process creation and management in this module is
handled by the ``Popen`` class. It offers a lot of flexibility so that
developers are able to handle the less common cases not covered by the
convenience functions.

class class subprocess.Popen(args, bufsize=0, executable=None, stdin=None, stdout=None, stderr=None, preexec_fn=None, close_fds=True, shell=False, cwd=None, env=None, universal_newlines=False, startupinfo=None, creationflags=0, restore_signals=True, start_new_session=False, pass_fds=())

   Arguments are:

   *args* should be a string, or a sequence of program arguments.  The
   program to execute is normally the first item in the args sequence
   or the string if a string is given, but can be explicitly set by
   using the *executable* argument.  When *executable* is given, the
   first item in the args sequence is still treated by most programs
   as the command name, which can then be different from the actual
   executable name.  On Unix, it becomes the display name for the
   executing program in utilities such as **ps**.

   On Unix, with *shell=False* (default): In this case, the Popen
   class uses ``os.execvp()`` like behavior to execute the child
   program. *args* should normally be a sequence.  If a string is
   specified for *args*, it will be used as the name or path of the
   program to execute; this will only work if the program is being
   given no arguments.

   Note: ``shlex.split()`` can be useful when determining the correct
     tokenization for *args*, especially in complex cases:

        >>> import shlex, subprocess
        >>> command_line = input()
        /bin/vikings -input eggs.txt -output "spam spam.txt" -cmd "echo '$MONEY'"
        >>> args = shlex.split(command_line)
        >>> print(args)
        ['/bin/vikings', '-input', 'eggs.txt', '-output', 'spam spam.txt', '-cmd', "echo '$MONEY'"]
        >>> p = subprocess.Popen(args) # Success!

     Note in particular that options (such as *-input*) and arguments
     (such as *eggs.txt*) that are separated by whitespace in the
     shell go in separate list elements, while arguments that need
     quoting or backslash escaping when used in the shell (such as
     filenames containing spaces or the *echo* command shown above)
     are single list elements.

   On Unix, with *shell=True*: If args is a string, it specifies the
   command string to execute through the shell.  This means that the
   string must be formatted exactly as it would be when typed at the
   shell prompt.  This includes, for example, quoting or backslash
   escaping filenames with spaces in them.  If *args* is a sequence,
   the first item specifies the command string, and any additional
   items will be treated as additional arguments to the shell itself.
   That is to say, *Popen* does the equivalent of:

      Popen(['/bin/sh', '-c', args[0], args[1], ...])

   Warning: Enabling this option can be a security hazard if combined with
     untrusted input. See the warning under *Frequently Used
     Arguments* for details.

   On Windows: the ``Popen`` class uses CreateProcess() to execute the
   child program, which operates on strings.  If *args* is a sequence,
   it will be converted to a string in a manner described in
   *Converting an argument sequence to a string on Windows*.

   *bufsize*, if given, has the same meaning as the corresponding
   argument to the built-in open() function: ``0`` means unbuffered,
   ``1`` means line buffered, any other positive value means use a
   buffer of (approximately) that size.  A negative *bufsize* means to
   use the system default, which usually means fully buffered.  The
   default value for *bufsize* is ``0`` (unbuffered).

   Note: If you experience performance issues, it is recommended that you
     try to enable buffering by setting *bufsize* to either -1 or a
     large enough positive value (such as 4096).

   The *executable* argument specifies the program to execute. It is
   very seldom needed: Usually, the program to execute is defined by
   the *args* argument. If ``shell=True``, the *executable* argument
   specifies which shell to use. On Unix, the default shell is
   ``/bin/sh``.  On Windows, the default shell is specified by the
   ``COMSPEC`` environment variable. The only reason you would need to
   specify ``shell=True`` on Windows is where the command you wish to
   execute is actually built in to the shell, eg ``dir``, ``copy``.
   You don't need ``shell=True`` to run a batch file, nor to run a
   console-based executable.

   *stdin*, *stdout* and *stderr* specify the executed program's
   standard input, standard output and standard error file handles,
   respectively.  Valid values are ``PIPE``, ``DEVNULL``, an existing
   file descriptor (a positive integer), an existing *file object*,
   and ``None``.  ``PIPE`` indicates that a new pipe to the child
   should be created.  ``DEVNULL`` indicates that the special file
   ``os.devnull`` will be used. With the default settings of ``None``,
   no redirection will occur; the child's file handles will be
   inherited from the parent.  Additionally, *stderr* can be
   ``STDOUT``, which indicates that the stderr data from the
   applications should be captured into the same file handle as for
   stdout.

   If *preexec_fn* is set to a callable object, this object will be
   called in the child process just before the child is executed.
   (Unix only)

   Warning: The *preexec_fn* parameter is not safe to use in the presence of
     threads in your application.  The child process could deadlock
     before exec is called. If you must use it, keep it trivial!
     Minimize the number of libraries you call into.

   Note: If you need to modify the environment for the child use the *env*
     parameter rather than doing it in a *preexec_fn*. The
     *start_new_session* parameter can take the place of a previously
     common use of *preexec_fn* to call os.setsid() in the child.

   If *close_fds* is true, all file descriptors except ``0``, ``1``
   and ``2`` will be closed before the child process is executed.
   (Unix only). The default varies by platform:  Always true on Unix.
   On Windows it is true when *stdin*/*stdout*/*stderr* are ``None``,
   false otherwise. On Windows, if *close_fds* is true then no handles
   will be inherited by the child process.  Note that on Windows, you
   cannot set *close_fds* to true and also redirect the standard
   handles by setting *stdin*, *stdout* or *stderr*.

   Changed in version 3.2: The default for *close_fds* was changed
   from ``False`` to what is described above.

   *pass_fds* is an optional sequence of file descriptors to keep open
   between the parent and child.  Providing any *pass_fds* forces
   *close_fds* to be ``True``.  (Unix only)

   New in version 3.2: The *pass_fds* parameter was added.

   If *cwd* is not ``None``, the child's current directory will be
   changed to *cwd* before it is executed.  Note that this directory
   is not considered when searching the executable, so you can't
   specify the program's path relative to *cwd*.

   If *restore_signals* is True (the default) all signals that Python
   has set to SIG_IGN are restored to SIG_DFL in the child process
   before the exec. Currently this includes the SIGPIPE, SIGXFZ and
   SIGXFSZ signals. (Unix only)

   Changed in version 3.2: *restore_signals* was added.

   If *start_new_session* is True the setsid() system call will be
   made in the child process prior to the execution of the subprocess.
   (Unix only)

   Changed in version 3.2: *start_new_session* was added.

   If *env* is not ``None``, it must be a mapping that defines the
   environment variables for the new process; these are used instead
   of the default behavior of inheriting the current process'
   environment.

   Note: If specified, *env* must provide any variables required for the
     program to execute.  On Windows, in order to run a side-by-side
     assembly the specified *env* **must** include a valid
     ``SystemRoot``.

   If *universal_newlines* is ``True``, the file objects *stdin*,
   *stdout* and *stderr* are opened as text streams in universal
   newlines mode, as described above in *Frequently Used Arguments*.

   If given, *startupinfo* will be a ``STARTUPINFO`` object, which is
   passed to the underlying ``CreateProcess`` function.
   *creationflags*, if given, can be ``CREATE_NEW_CONSOLE`` or
   ``CREATE_NEW_PROCESS_GROUP``. (Windows only)

   Popen objects are supported as context managers via the ``with``
   statement: on exit, standard file descriptors are closed, and the
   process is waited for.

      with Popen(["ifconfig"], stdout=PIPE) as proc:
          log.write(proc.stdout.read())

   Changed in version 3.2: Added context manager support.


Exceptions
----------

Exceptions raised in the child process, before the new program has
started to execute, will be re-raised in the parent.  Additionally,
the exception object will have one extra attribute called
``child_traceback``, which is a string containing traceback
information from the child's point of view.

The most common exception raised is ``OSError``.  This occurs, for
example, when trying to execute a non-existent file.  Applications
should prepare for ``OSError`` exceptions.

A ``ValueError`` will be raised if ``Popen`` is called with invalid
arguments.

``check_call()`` and ``check_output()`` will raise
``CalledProcessError`` if the called process returns a non-zero return
code.

All of the functions and methods that accept a *timeout* parameter,
such as ``call()`` and ``Popen.communicate()`` will raise
``TimeoutExpired`` if the timeout expires before the process exits.

Exceptions defined in this module all inherit from
``SubprocessError``.

   New in version 3.3: The ``SubprocessError`` base class was added.


Security
--------

Unlike some other popen functions, this implementation will never call
a system shell implicitly.  This means that all characters, including
shell metacharacters, can safely be passed to child processes.
Obviously, if the shell is invoked explicitly, then it is the
application's responsibility to ensure that all whitespace and
metacharacters are quoted appropriately.


Popen Objects
=============

Instances of the ``Popen`` class have the following methods:

Popen.poll()

   Check if child process has terminated.  Set and return
   ``returncode`` attribute.

Popen.wait(timeout=None)

   Wait for child process to terminate.  Set and return ``returncode``
   attribute.

   If the process does not terminate after *timeout* seconds, raise a
   ``TimeoutExpired`` exception.  It is safe to catch this exception
   and retry the wait.

   Warning: This will deadlock when using ``stdout=PIPE`` and/or
     ``stderr=PIPE`` and the child process generates enough output to
     a pipe such that it blocks waiting for the OS pipe buffer to
     accept more data.  Use ``communicate()`` to avoid that.

   Changed in version 3.3: *timeout* was added.

Popen.communicate(input=None, timeout=None)

   Interact with process: Send data to stdin.  Read data from stdout
   and stderr, until end-of-file is reached.  Wait for process to
   terminate.  The optional *input* argument should be data to be sent
   to the child process, or ``None``, if no data should be sent to the
   child.  The type of *input* must be bytes or, if
   *universal_newlines* was ``True``, a string.

   ``communicate()`` returns a tuple ``(stdoutdata, stderrdata)``.

   Note that if you want to send data to the process's stdin, you need
   to create the Popen object with ``stdin=PIPE``.  Similarly, to get
   anything other than ``None`` in the result tuple, you need to give
   ``stdout=PIPE`` and/or ``stderr=PIPE`` too.

   If the process does not terminate after *timeout* seconds, a
   ``TimeoutExpired`` exception will be raised.  Catching this
   exception and retrying communication will not lose any output.

   The child process is not killed if the timeout expires, so in order
   to cleanup properly a well-behaved application should kill the
   child process and finish communication:

      proc = subprocess.Popen(...)
      try:
          outs, errs = proc.communicate(timeout=15)
      except TimeoutExpired:
          proc.kill()
          outs, errs = proc.communicate()

   Note: The data read is buffered in memory, so do not use this method if
     the data size is large or unlimited.

   Changed in version 3.3: *timeout* was added.

Popen.send_signal(signal)

   Sends the signal *signal* to the child.

   Note: On Windows, SIGTERM is an alias for ``terminate()``. CTRL_C_EVENT
     and CTRL_BREAK_EVENT can be sent to processes started with a
     *creationflags* parameter which includes
     *CREATE_NEW_PROCESS_GROUP*.

Popen.terminate()

   Stop the child. On Posix OSs the method sends SIGTERM to the child.
   On Windows the Win32 API function ``TerminateProcess()`` is called
   to stop the child.

Popen.kill()

   Kills the child. On Posix OSs the function sends SIGKILL to the
   child. On Windows ``kill()`` is an alias for ``terminate()``.

The following attributes are also available:

Warning: Use ``communicate()`` rather than ``.stdin.write``, ``.stdout.read``
  or ``.stderr.read`` to avoid deadlocks due to any of the other OS
  pipe buffers filling up and blocking the child process.

Popen.stdin

   If the *stdin* argument was ``PIPE``, this attribute is a *file
   object* that provides input to the child process.  Otherwise, it is
   ``None``.

Popen.stdout

   If the *stdout* argument was ``PIPE``, this attribute is a *file
   object* that provides output from the child process.  Otherwise, it
   is ``None``.

Popen.stderr

   If the *stderr* argument was ``PIPE``, this attribute is a *file
   object* that provides error output from the child process.
   Otherwise, it is ``None``.

Popen.pid

   The process ID of the child process.

   Note that if you set the *shell* argument to ``True``, this is the
   process ID of the spawned shell.

Popen.returncode

   The child return code, set by ``poll()`` and ``wait()`` (and
   indirectly by ``communicate()``).  A ``None`` value indicates that
   the process hasn't terminated yet.

   A negative value ``-N`` indicates that the child was terminated by
   signal ``N`` (Unix only).


Windows Popen Helpers
=====================

The ``STARTUPINFO`` class and following constants are only available
on Windows.

class class subprocess.STARTUPINFO

   Partial support of the Windows STARTUPINFO structure is used for
   ``Popen`` creation.

   dwFlags

      A bit field that determines whether certain ``STARTUPINFO``
      attributes are used when the process creates a window.

         si = subprocess.STARTUPINFO()
         si.dwFlags = subprocess.STARTF_USESTDHANDLES | subprocess.STARTF_USESHOWWINDOW

   hStdInput

      If ``dwFlags`` specifies ``STARTF_USESTDHANDLES``, this
      attribute is the standard input handle for the process. If
      ``STARTF_USESTDHANDLES`` is not specified, the default for
      standard input is the keyboard buffer.

   hStdOutput

      If ``dwFlags`` specifies ``STARTF_USESTDHANDLES``, this
      attribute is the standard output handle for the process.
      Otherwise, this attribute is ignored and the default for
      standard output is the console window's buffer.

   hStdError

      If ``dwFlags`` specifies ``STARTF_USESTDHANDLES``, this
      attribute is the standard error handle for the process.
      Otherwise, this attribute is ignored and the default for
      standard error is the console window's buffer.

   wShowWindow

      If ``dwFlags`` specifies ``STARTF_USESHOWWINDOW``, this
      attribute can be any of the values that can be specified in the
      ``nCmdShow`` parameter for the ShowWindow function, except for
      ``SW_SHOWDEFAULT``. Otherwise, this attribute is ignored.

      ``SW_HIDE`` is provided for this attribute. It is used when
      ``Popen`` is called with ``shell=True``.


Constants
---------

The ``subprocess`` module exposes the following constants.

subprocess.STD_INPUT_HANDLE

   The standard input device. Initially, this is the console input
   buffer, ``CONIN$``.

subprocess.STD_OUTPUT_HANDLE

   The standard output device. Initially, this is the active console
   screen buffer, ``CONOUT$``.

subprocess.STD_ERROR_HANDLE

   The standard error device. Initially, this is the active console
   screen buffer, ``CONOUT$``.

subprocess.SW_HIDE

   Hides the window. Another window will be activated.

subprocess.STARTF_USESTDHANDLES

   Specifies that the ``STARTUPINFO.hStdInput``,
   ``STARTUPINFO.hStdOutput``, and ``STARTUPINFO.hStdError``
   attributes contain additional information.

subprocess.STARTF_USESHOWWINDOW

   Specifies that the ``STARTUPINFO.wShowWindow`` attribute contains
   additional information.

subprocess.CREATE_NEW_CONSOLE

   The new process has a new console, instead of inheriting its
   parent's console (the default).

   This flag is always set when ``Popen`` is created with
   ``shell=True``.

subprocess.CREATE_NEW_PROCESS_GROUP

   A ``Popen`` ``creationflags`` parameter to specify that a new
   process group will be created. This flag is necessary for using
   ``os.kill()`` on the subprocess.

   This flag is ignored if ``CREATE_NEW_CONSOLE`` is specified.


Replacing Older Functions with the subprocess Module
====================================================

In this section, "a becomes b" means that b can be used as a
replacement for a.

Note: All "a" functions in this section fail (more or less) silently if
  the executed program cannot be found; the "b" replacements raise
  ``OSError`` instead.In addition, the replacements using
  ``check_output()`` will fail with a ``CalledProcessError`` if the
  requested operation produces a non-zero return code. The output is
  still available as the ``output`` attribute of the raised exception.

In the following examples, we assume that the relevant functions have
already been imported from the subprocess module.


Replacing /bin/sh shell backquote
---------------------------------

   output=`mycmd myarg`
   # becomes
   output = check_output(["mycmd", "myarg"])


Replacing shell pipeline
------------------------

   output=`dmesg | grep hda`
   # becomes
   p1 = Popen(["dmesg"], stdout=PIPE)
   p2 = Popen(["grep", "hda"], stdin=p1.stdout, stdout=PIPE)
   p1.stdout.close()  # Allow p1 to receive a SIGPIPE if p2 exits.
   output = p2.communicate()[0]

The p1.stdout.close() call after starting the p2 is important in order
for p1 to receive a SIGPIPE if p2 exits before p1.

Alternatively, for trusted input, the shell's own pipeline support may
still be used directly:

   output=`dmesg | grep hda`
   # becomes
   output=check_output("dmesg | grep hda", shell=True)


Replacing ``os.system()``
-------------------------

   sts = os.system("mycmd" + " myarg")
   # becomes
   sts = call("mycmd" + " myarg", shell=True)

Notes:

* Calling the program through the shell is usually not required.

A more realistic example would look like this:

   try:
       retcode = call("mycmd" + " myarg", shell=True)
       if retcode < 0:
           print("Child was terminated by signal", -retcode, file=sys.stderr)
       else:
           print("Child returned", retcode, file=sys.stderr)
   except OSError as e:
       print("Execution failed:", e, file=sys.stderr)


Replacing the ``os.spawn`` family
---------------------------------

P_NOWAIT example:

   pid = os.spawnlp(os.P_NOWAIT, "/bin/mycmd", "mycmd", "myarg")
   ==>
   pid = Popen(["/bin/mycmd", "myarg"]).pid

P_WAIT example:

   retcode = os.spawnlp(os.P_WAIT, "/bin/mycmd", "mycmd", "myarg")
   ==>
   retcode = call(["/bin/mycmd", "myarg"])

Vector example:

   os.spawnvp(os.P_NOWAIT, path, args)
   ==>
   Popen([path] + args[1:])

Environment example:

   os.spawnlpe(os.P_NOWAIT, "/bin/mycmd", "mycmd", "myarg", env)
   ==>
   Popen(["/bin/mycmd", "myarg"], env={"PATH": "/usr/bin"})


Replacing ``os.popen()``, ``os.popen2()``, ``os.popen3()``
----------------------------------------------------------

   (child_stdin, child_stdout) = os.popen2(cmd, mode, bufsize)
   ==>
   p = Popen(cmd, shell=True, bufsize=bufsize,
             stdin=PIPE, stdout=PIPE, close_fds=True)
   (child_stdin, child_stdout) = (p.stdin, p.stdout)

   (child_stdin,
    child_stdout,
    child_stderr) = os.popen3(cmd, mode, bufsize)
   ==>
   p = Popen(cmd, shell=True, bufsize=bufsize,
             stdin=PIPE, stdout=PIPE, stderr=PIPE, close_fds=True)
   (child_stdin,
    child_stdout,
    child_stderr) = (p.stdin, p.stdout, p.stderr)

   (child_stdin, child_stdout_and_stderr) = os.popen4(cmd, mode, bufsize)
   ==>
   p = Popen(cmd, shell=True, bufsize=bufsize,
             stdin=PIPE, stdout=PIPE, stderr=STDOUT, close_fds=True)
   (child_stdin, child_stdout_and_stderr) = (p.stdin, p.stdout)

Return code handling translates as follows:

   pipe = os.popen(cmd, 'w')
   ...
   rc = pipe.close()
   if rc is not None and rc >> 8:
       print("There were some errors")
   ==>
   process = Popen(cmd, 'w', stdin=PIPE)
   ...
   process.stdin.close()
   if process.wait() != 0:
       print("There were some errors")


Replacing functions from the ``popen2`` module
----------------------------------------------

Note: If the cmd argument to popen2 functions is a string, the command is
  executed through /bin/sh.  If it is a list, the command is directly
  executed.

   (child_stdout, child_stdin) = popen2.popen2("somestring", bufsize, mode)
   ==>
   p = Popen(["somestring"], shell=True, bufsize=bufsize,
             stdin=PIPE, stdout=PIPE, close_fds=True)
   (child_stdout, child_stdin) = (p.stdout, p.stdin)

   (child_stdout, child_stdin) = popen2.popen2(["mycmd", "myarg"], bufsize, mode)
   ==>
   p = Popen(["mycmd", "myarg"], bufsize=bufsize,
             stdin=PIPE, stdout=PIPE, close_fds=True)
   (child_stdout, child_stdin) = (p.stdout, p.stdin)

``popen2.Popen3`` and ``popen2.Popen4`` basically work as
``subprocess.Popen``, except that:

* ``Popen`` raises an exception if the execution fails.

* the *capturestderr* argument is replaced with the *stderr* argument.

* ``stdin=PIPE`` and ``stdout=PIPE`` must be specified.

* popen2 closes all file descriptors by default, but you have to
  specify ``close_fds=True`` with ``Popen`` to guarantee this behavior
  on all platforms or past Python versions.


Legacy Shell Invocation Functions
=================================

This module also provides the following legacy functions from the 2.x
``commands`` module. These operations implicitly invoke the system
shell and none of the guarantees described above regarding security
and exception handling consistency are valid for these functions.

subprocess.getstatusoutput(cmd)

   Return ``(status, output)`` of executing *cmd* in a shell.

   Execute the string *cmd* in a shell with ``os.popen()`` and return
   a 2-tuple ``(status, output)``.  *cmd* is actually run as ``{ cmd ;
   } 2>&1``, so that the returned output will contain output or error
   messages.  A trailing newline is stripped from the output.  The
   exit status for the command can be interpreted according to the
   rules for the C function ``wait()``.  Example:

      >>> subprocess.getstatusoutput('ls /bin/ls')
      (0, '/bin/ls')
      >>> subprocess.getstatusoutput('cat /bin/junk')
      (256, 'cat: /bin/junk: No such file or directory')
      >>> subprocess.getstatusoutput('/bin/junk')
      (256, 'sh: /bin/junk: not found')

   Availability: UNIX.

subprocess.getoutput(cmd)

   Return output (stdout and stderr) of executing *cmd* in a shell.

   Like ``getstatusoutput()``, except the exit status is ignored and
   the return value is a string containing the command's output.
   Example:

      >>> subprocess.getoutput('ls /bin/ls')
      '/bin/ls'

   Availability: UNIX.


Notes
=====


Converting an argument sequence to a string on Windows
------------------------------------------------------

On Windows, an *args* sequence is converted to a string that can be
parsed using the following rules (which correspond to the rules used
by the MS C runtime):

1. Arguments are delimited by white space, which is either a space or
   a tab.

2. A string surrounded by double quotation marks is interpreted as a
   single argument, regardless of white space contained within.  A
   quoted string can be embedded in an argument.

3. A double quotation mark preceded by a backslash is interpreted as a
   literal double quotation mark.

4. Backslashes are interpreted literally, unless they immediately
   precede a double quotation mark.

5. If backslashes immediately precede a double quotation mark, every
   pair of backslashes is interpreted as a literal backslash.  If the
   number of backslashes is odd, the last backslash escapes the next
   double quotation mark as described in rule 3.

See also:

   ``shlex``
      Module which provides function to parse and escape command
      lines.
